Spa Cover Lifts

Fold

Home / Products / Spa Cover Lifts

FOLD Spa Cover Lift (Black or Silver)

PRS-201-FOLD (Black)

PRS-251-FOLD (Silver)

Puri Tech Cover Lifts are designed to make your life easier and your spa time more enjoyable. The days of struggling with your spa cover are over. Puri Tech Fold is a bottom/deck mount spa cover lift removal system. Made with black powder-coated aluminum tubing, stainless steel hardware, & mounting brackets, the Fold was made to last from season to season-saving you time, effort, & money.

BOTTOM OR DECK MOUNT for a sleek, easy-to-use design. Using a cover lift will reduce the wear and tear on your spa cover.
MADE OF DURABLE black powder-coated aluminum tubing & stainless-steel hardware reducing the chance of rust over time.
EASY TO USE & INSTALL! Just fold the cover over the full-length center bar and use the padded handle to pull it over the back of the spa.
INCLUDES 3-HOOK TOWEL HOLDER Puri Tech Fold includes towel hooks for convenient storage.
FITS MOST SPAS up to 96". Clearance Requirements: 18" behind the spa & 5" on each side. Does not fit round, hexagon, or octagon spas.
ADJUSTABLE WIDTH AND HEIGHT - Max 105" x 70" x 2" (WxHxD)
WEIGHT: 12 lbs

HOW TO USE

TO OPEN SPA COVER
- Flip your spa cover back over the support bar that lays across the cover by the cover seam.
- Holding the top corner of the lifter, lift the bar towards the back of the spa until the spa cover is hanging slightly over a vertical position.

TO CLOSE SPA COVER
- Holding the top corner of the lifter and pulling down towards the middle of the spa.
- Once the spa cover is lying on the spa, take hold of the top half of the cover, pulling it up and forward to close the cover completely over the spa.

DO NOT USE your cover lifter in high wind conditions (more than 10 mph). Injury from the spa cover being blown over and impacting the spa user can occur.

DO NOT leave the lift open when not in use.

Pivot

FOLD - Manual / Instructions - ENGLISH

FOLD - Manual / Instructions - FRENCH

PIVOT Spa Cover Lift (Black or Silver)

PRS-101-PIVOT (Black)

PRS-151-PIVOT (Silver)

Puri Tech Cover Lifts are designed to make your life easier and your spa time more enjoyable. The days of struggling with your spa cover are over. Puri Tech Pivot is a top mount spa cover lift removal system. Made with double coated aluminum tubing, stainless steel hardware, & reinforced brackets, the Pivot was made to last from season to season saving you time, effort, & money.

REINFORCED PLASTIC BRACKETS lengthen the life of your new cover lifter
MADE OF DURABLE double coated aluminum tubing & stainless steel hardware reducing the chance of rust over time.
EASY TO USE! Just fold cover over the full-length center bar and use the padded handle to pull over the back of the spa.
INCLUDES 3-HOOK TOWEL HOLDER Puri Tech Pivot includes towel hooks for convenient storage.
FITS MOST SPAS up to 96". Clearance Requirements: 10" to 15" behind the spa & 5" on each side. Corner radius up to 12"
ADJUSTABLE WIDTH AND HEIGHT - Max 109" x 41" x 16" (WxHxD)
WEIGHT: 12 lbs

HOW TO USE

TO OPEN SPA COVER
- Fold spa cover onto itself.
- Lift the Lifter and spa cover to the upright position by lifting the Foam Grip on the Support Arm, while supporting the middle of the cover with the other hand.
- The Pivot Arm will stop when it contacts the Mounting Bracket.

TO CLOSE SPA COVER
- With the spa cover in the upright position, hold the Foam Grip on the Support Arm and slowly guide the cover and Lifter onto the spa shell.
- Unfold the spa cover off itself and engage the spa cover locks if available.

CAUTION:
DO NOT USE THE COVER LIFT IN HIGH WIND CONDITIONS OR LEAVE IT IN THE UPRIGHT POSITION UNATTENDED. It can cause the cover to fall, damaging the spa, lifter, and cover, or it can also cause injury to the spa occupants.

Rock

PIVOT - Manual / Instructions - ENGLISH

PIVOT - Manual / Instructions - FRENCH

ROCK Spa Cover Lift (Black or Silver)

PRS-601-ROCK (Black)

PRS-651-ROCK (Silver)

Puri Tech Cover Lift - undermount bracket spa & hot tub cover lift removal system

Undermount brackets slide under the spa, requiring no attachment to the spa skirt.
The cover folds down and away, allowing a more open view.
Made of durable, double-coated aluminum tubing & stainless steel hardware, resisting rust.
For spas up to 96", requires 18 inches of clearance behind the spa - 5 inches on each side.
Mounts onto the side of the spa using under spa brackets.
Pivot style lift, not suitable for round or inground spas.
Not suitable for round or inground spas.
ADJUSTABLE WIDTH AND HEIGHT - Max 130" x 54" x 16" (WxHxD)
WEIGHT: 19 lbs

CAUTION:

DO NOT USE THE COVER LIFT IN HIGH WIND CONDITIONS OR LEAVE IT IN THE UPRIGHT POSITION UNATTENDED. It can cause the cover to fall, damaging the spa, lifter, and cover, or it can also cause injury to the spa occupants.

Elevate

ROCK - Manual / Instructions - ENGLISH

ROCK - Manual / Instructions - FRENCH

ELEVATE Spa Cover Lift (Black)

PRS-301-ELEVATE

Puri Tech Cover Lifts are designed to make your life easier and your spa time more enjoyable. The days of struggling with your spa cover are over. Puri Tech Elevate is a top mount hydraulic spa cover lift removal system. Made with superior powder-coated aluminum tubing, stainless steel hardware, & steel mounting brackets, the Elevate was made to last from season to season-saving you time, effort, & money.

TOP MOUNT HYDRAULIC makes for the cleanest & easiest cover lift. Using a cover lift will reduce the wear and tear on your spa cover.
MADE OF SUPERIOR powder-coated aluminum tubing, stainless steel hardware, & steel mounting brackets. Corrosion Resistant!
EASY TO USE! Just fold the cover over the full-length center bar and pull over the back of the spa. The dual assist shock has a safety lock to ensure a painless lift.
INCLUDES 3-HOOK TOWEL HOLDER Puri Tech Fold includes towel hooks for convenient storage.
FITS MOST SPAS up to 105". Clearance Requirements: 6" behind the spa & 5" on each side. Does not fit round, hexagon, or octagon spas. Compact Design!
ADJUSTABLE WIDTH AND HEIGHT - Maximum 97" x 48" x 27" (WxHxD)
WEIGHT: 19 lbs

HOW TO USE

TO OPEN SPA COVER
- Flip your spa cover back over the support bar that lays across the cover by the cover seam.
- Taking hold of the top corner of the lifter, lift the bar towards the back of the spa until the spa cover is in a vertical position.

The top mount hydraulic lifter comes equipped with a safety lock that prevents the lid from shutting when in the open position.

TO CLOSE SPA COVER
- Lift the safety lock.
- Take hold of the top corner of the lifter and pull down towards the middle of the spa.
- Once the spa cover is lying on the spa, take hold of the top half of the cover pulling it up and forward to close the cover completely over the spa.

CAUTION:

Glide

ELEVATE - Manual / Instructions - ENGLISH

ELEVATE - Manual / Instructions - FRENCH

GLIDE Spa Cover Roller (Black)

PRS-501-GLIDE

Puri Tech Cover Lifts are designed to make your life easier and your spa time more enjoyable. The days of struggling with your spa cover are over. Puri Tech Glide is a side mount roller spa cover lift removal & storage system. Made with polycarbonate material strengthened by fiberglass, the Glide was made to last from season to season-saving you time, effort, & money.

SIDE MOUNT ROLLERS for a sleek, easy-to-use design. Gliders will fold away when not in use. Using a cover lift will reduce the wear and tear on your spa cover.
MADE OF DURABLE polycarbonate material strengthened by fiberglass reducing the chance of rust over time.
EASY TO USE & INSTALL! Just screw gliders to the side of your spa. No assembly required! To use, fold the cover in half and glide it onto the lift.
INCLUDES 4 ROLLERS on each arm to make the removal process easy and effortless.
FITS ALL SPAS that are square and rectangle. Clearance Requirements: At least half of your spa cover size. Does not fit round, hexagon, or octagon spas.
DIMENSIONS - 30.3" x 28.8" x 2" (WxHxD)
WEIGHT: 9 lbs

HOW TO USE

TO OPEN SPA COVER
- Lock each of the Roller Racks into position by rotating counterclockwise, then securing the bottom edge of the brace.
- Flip one cover half over the other and push the spa cover on top of the rollers.

Do not extend the roller rack arm more than 90° upward, or damage to the joint may result.

TO CLOSE SPA COVER
- Push the folded spa cover back over the spa
- Flip the upside half back onto the spa.
- Release the braces & rotate each roller rack clockwise to the rest position.

cradle

GLIDE - Manual / Instructions - ENGLISH

GLIDE - Manual / Instructions - FRENCH

CRADLE Hot Tub Spa Cover Lift (Black)

PRS-701-CRADLE

This universal design fits all shape spas and is made of black aluminum for rust-free construction. The skirt-free attachment with an undermount plate makes it easy to install, and the black aluminum "rust-free" construction ensures that it will last for years. The cover stores neatly on the side of the spa, the single shock provides easy lifting and lowering of the cover. The undermount design means there's no need to attach it to the spa skirt, and it has a clearance of 18" at the back of the spa and no side clearance needed.

GET THE ULTIMATE SPA EXPERIENCE. Relax and rejuvenate in your own backyard! The Puri Tech Cradle Hot Tub Spa Cover Lift provides easy access to your spa and allows you to effortlessly raise and lower the cover.
UNIVERSAL DESIGN FITS SHAPE SPAS. No need to worry about the shape of your spa! Our universal design fits all shapes and sizes, making installation a breeze. Fits spa 24"-38" high and covers up to 6" taper.
SKIRT FREE ATTACHMENT WITH UNDERMOUNT PLATE. Keep your spa looking clean and sleek with our skirt-free attachment! The undermount plate provides a secure fit and eliminates the need for additional hardware.
BLACK ALUMINUM "RUST FREE" CONSTRUCTION. Ensures that it will last for years.
EASY TO USE. Our Shock Lift Assist makes raising and lowering your cover a breeze! Simply push down on the cover and it will lift up with ease. No more struggling to get your cover on or off!
DIMENSIONS - 27" x 40" (WxH) / Arms: 37" bottom and 19" top

HOW TO USE

TO OPEN SPA COVER
- Facing the cover lift, fold out the cover receiver arms into locked position.
- Raise the cover carrier level with the spa and fold the cover in half.
- Slide the lift into the cover carrier and push the cover down towards the side of the spa.

TO CLOSE SPA COVER
- Facing the cover, raise the cover and push the folded cover onto the spa.
- Fold the cover carrier down and unfold the cover to the closed position.