Cyanuric Acid Stabilizer and Conditioner
Sold in bags of 5 lb, 20lb, 10 lb and 25 lb (PCYA)
Stabilizer helps to protect chlorine in pool water from disappearing caused by the sun. An increase in sunlight can cause difficulty in maintaining chlorine levels.
PROTECTS CHLORINE LEVEL
Balanced CYA levels adds a protection barrier from the sun UV rays.
Add 1 lb to raise CYA level 10ppm per 10,000 gallons of water.
Recommended level is between
50-80ppm.
INCREASES CYA STABILIZER LEVEL
ACTIVE INGREDIENT:
Cyanuric Acid ...................................100%
DIRECTIONS FOR USE:
1. Backwash or clean filter before use.
2. Adjust chlorine levels to 1 - 3 ppm with shock.
3. Measure stabilizer levels (Ideal Range 30 - 80 ppm). Determine dosage of stabilizer for the
chart below.
4. Pour directly into skimmer with circulation pump on. Keep circulation on for at least 48 hours.
Do not backwash or clean filter several days after use.
5. Check stabilizer twice a year and adjust as needed.
Dosage of Stabilizer (In Pounds)
FIRST AID:
IF IN EYES – Flush eyes with water for 15 minutes, while lifting eyelids. Remove contact lenses, after the first 5 mins., then continue to rinse eyes. Call a physician if irritation persists.
IF ON SKIN OR CLOTHING – Take off contaminated clothing. Brush off excess and rinse skin immediately with water for 15-20 minutes.
IF INHALED – Remove yourself to fresh air. If the person is not breathing, call 911, then give artificial respiration or mouth-to-mouth, if possible.
IF SWALLOWED – If large amounts are swallowed, drink a large amount of water. Do not
induce vomiting. Call a physician.
STORAGE and DISPOSAL:
Keep the product dry in the original, tightly closed container when not in use. Store in a cool, dry, well-ventilated area. Keep out of reach of children. Rinse empty container thoroughly with water then place in the trash receptacle.